Tee Connector Adapter for TOTO Bidet Accessories

Revised Content:

Tee Stop Valve Adapter for TOTO Washlet Bidet, Handheld Sprayer, Dishwasher, and Toilet Tank 3/8"x3/8"x3/8" or 1/2" Toilet T Adapter Brass Angle Stop Add-A-Tee Valve for TOTO Washlet Bidet

Installation Steps: 1. Turn off the cold water or hot water shut-off valve. 2. Turn on the faucet to release any pressure, then disconnect the existing faucet connector pipe. 3. Ensure the O-ring is seated inside the feed water adapter female end, then twist it onto the cold water or hot water angle stop valve. 4. Twist the existing faucet connector pipe onto the male end of the feed water adapter. 5. Turn off the 3/8-inch tee stop valve, turn on the cold water or hot water supply valve, and check the tee stop valve for leaks. 6. The water splitter male thread port can be used to connect the TOTO Washlet Bidet, Handheld Sprayer, Dishwasher, Toilet Tank, Second Faucet, or Glass Rinser, and check for leaks. 7. End of installation.

The lead-free brass, chrome-plated tee stop valve bidet T adapter is suitable for the bathroom, allowing you to tap into the current angle stop valve at the bathroom wall and add an outlet to supply water to the TOTO Washlet Bidet, Handheld Bidet Sprayer, or Toilet Tank. It can also be used to tap into the current angle stop valve at the kitchen wall, adding an outlet to supply water for a Dishwasher, Glass Rinser, or Second Faucet.

The tee of the bidet sprayer adapter solves the problem of connecting a bidet to the water inlet. It can be used on the angle stop valve (not the toilet tank) to supply the toilet tank and bidet seat. This is one of the only solutions for tapping into a toilet water supply for a bidet when you don't have access to the fitting at the bottom of the tank and without having to remove the toilet.

The 3/8" OD female compression inlet x 3/8" OD compression male thread outlet x 3/8" OD compression or 1/2" OD compression male thread outlet features a 1/4 turn tee stop valve, allowing you to freely control the on-off of the branch waterway and adjust the water flow size to suit your needs. If you go on vacation, you can simply shut this off and not worry about the bidet potentially rupturing or causing any issues.

The bidet T valve adapter tee connector adapter has a built-in rubber ring for better sealing, and a self-contained O-ring, eliminating the need for Teflon tape. It is suitable for both cold and hot water systems, as well as potable and non-potable water.

The compression T-valve is made of lead-free brass metal, offering much higher performance and durability than plastic, with no need to consider replacement for several years. It's great for residential and commercial applications.

Package Included: 3/8"x3/8"x3/8" Tee Stop Valve x 1, 3/8" Female Compression Thread to 1/2" Compression Male Thread Adapter x 1.

product information: